Our Complete Range of Refrigerated Compressed Air Dryers
10 to 350 CFM
25 to 800 CFM
1000 to 3500 CFM
300 to 2800 CFM
20 to 110 CFM
Custom Units up to 25,000+ CFM

1-800-345-8207





Industrial Home Page
American Series Variable Speed Drive Dryers
Rally 4 Series High Inlet Temperature Dryers
Independence Series Process Dryers - 3,000 to 25,000+ CFM
Revolution, Empire & Apex - Non-Cycling Refrigerated Dryers
Filters and Conversion Elements
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
 








Custom Engineering Makes General's Independence Series Hard to Beat!

Custom Options:

  • Under 1 psid
  • Systems Pressure (20 - 300 psig)
  • Special Electrical
  • Remote Condenser
  • Custom Pressure Dew Point
  • Stainless Steel Air Circuit
  • On Site UL/CSA Approval
  • 1 Micron/0.1 ppm Filtration
  • Variable Speed Drive for Energy Savings

Most Energy Efficient

If you are familiar with General Air Products line of refrigerated air dryers then you already know that we are big on Energy Savings. The Independence Series of process compressed air dryers carries this idea as well.

Real Dollars Example: Total Energy Cost Comparison

Downstream of a 4000 scfm compressed air system running 24 hours per day, at 93% motor efficiency and an electrical cost of $0.10 /kW-hr, a GIS 4000 saves up to $31,000 over three years compared to other cycling and non-cycling dryers. Even when the average load is only 60%, you save up to $22,000.

How does General make the Independence Series Dryer so Energy Efficient?

By Incorporating the Features Below:

  • Unloading Refrigeration Compressor
  • Turbo-Fin Heat Exchanger
  • Energy Saving Variable Speed Drive (optional)
  • Dual Zero Air Loss Drains
  • Cold Coalsecer
Send Us A Request for Quote - Click on the link to fill in our Application Data Sheet. It will be submitted to one of our Compressed Air Treatment Experts who will produce a quote based on your specifications. Normally, we are able to contact you within 24 hours of your submission.
Variable Speed Dryers - High Inlet Temperature Dryers - Process Dryers - Non-Cycling Dryers - Filters - Aftercoolers & Separators - Heat Exchangers - Oil Water Separators - Drain Valves - Chillers - Air Fluid Coolers - Evaporative Fluid Coolers - Pumping Stations - Desiccant or Regenerative Dryers - Safety & Check Valves - Pressure Switches - Electrical Accessories - Receivers - Technical Info - Contact Us - Product Index