1-800-345-8207





Industrial Home Page
American Series Variable Speed Drive Dryers
Rally 4 Series High Inlet Temperature Dryers
Independence Series Process Dryers - 3,000 to 25,000+ CFM
Revolution, Empire & Apex - Non-Cycling Refrigerated Dryers
Filters and Conversion Elements
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
Aftercoolers & Separators
 

Closed Loop Cooling Systems:
Air Fluid Coolers
The GENERAL Air Fluid Cooler (AFC) is a completely sealed, closed-loop cooler. As the main cooling section in any closed loop system, the AFC ensures continuous cooling at the lowest utility cost. Industrial liquid cooled equipment such as air compressors, hydraulic presses, welding machines and furnaces are easily cooled and at the same time kept clean of costly sludge, lime and other typical open system contaminants.

UL Listed in the US and Canada

Custom Equipment White Paper:
Wash-Down Application Equipment

Send Us Your Application Data - click on this link to fill in our application data form. Your information will be reviewed and quoted, for free, by one of our Process Cooling Experts!

The benefits of selecting a GENERAL "AFC" are many:

  • Eliminates high city water costs.
  • Eliminates scaling and corrosion.
  • Eliminates high treatment and sewage costs.
  • Low operating costs.
  • Easy indoor or outdoor installation.
  • Glycol systems provide freeze protection.
  • Potential to reclaim waste heat, promoting additional utility savings.

By design, a GENERAL “AFC” unit will convert costly existing or new water-cooled equipment, to a less-expensive air-cooled mode of operation.

The end result - a FAST RETURN on your company's investment.
Custom Units, like this Compact Air Fluid Cooler with Integral Pump and Tank, set us apart as a manufacturer for every application.

Installation Simplified
To promote ease of installation of the GENERAL “AFC” unit, GENERAL Fluid Pumping Stations (FPS) are provided in simplex or duplex pump configurations. The GENERAL “FPS” units are completely pre-wired and pre-plumbed on a common steel base plate for further ease of installation.

For more on General Fluid Pumping Stations Click Here

General's Air Fluid Cooler - Technical Benefits
  • High efficiency coil; copper tubes are mechanically expanded into aluminum fins. Tube sheets are aluminum with collars, preventing tube wear due to thermal expansion.
  • Coil is tested to 400 PSIG under water.
  • Corrosion resistant construction, mill galvanized steel housing with access doors at each fan for inspection. Vent and drain connections are standard.
  • 208, 230, 460, 575, Volt all available as standard. 50 Hz units available - Consult Factory.
  • Weather resistant motors with sealed ball bearings, internal overload protection, shaft slingers and hardware designed for outdoor duty.
  • Direct drive propeller fans, providing uniform air distribution and quite efficient operation.
  • Optional weather resistant control panel for fan cycling (multiple fan units) constructed to NEMA 3 design (control voltage is 115/60/1 VAC)
Variable Speed Dryers - High Inlet Temperature Dryers - Process Dryers - Non-Cycling Dryers - Filters - Aftercoolers & Separators - Heat Exchangers - Oil Water Separators - Drain Valves - Chillers - Air Fluid Coolers - Evaporative Fluid Coolers - Pumping Stations - Desiccant or Regenerative Dryers - Safety & Check Valves - Pressure Switches - Electrical Accessories - Receivers - Technical Info - Contact Us - Product Index